IntuneDeviceConfigurationIdentityProtectionPolicyWindows10

Parameters

Parameter Attribute DataType Description Allowed Values
EnhancedAntiSpoofingForFacialFeaturesEnabled Write Boolean Boolean value used to enable enhanced anti-spoofing for facial feature recognition on Windows Hello face authentication.
PinExpirationInDays Write UInt32 Integer value specifies the period (in days) that a PIN can be used before the system requires the user to change it. Valid values are 0 to 730 inclusive. Valid values 0 to 730
PinLowercaseCharactersUsage Write String This value configures the use of lowercase characters in the Windows Hello for Business PIN. Possible values are: blocked, required, allowed, notConfigured. blocked, required, allowed, notConfigured
PinMaximumLength Write UInt32 Integer value that sets the maximum number of characters allowed for the work PIN. Valid values are 4 to 127 inclusive and greater than or equal to the value set for the minimum PIN. Valid values 4 to 127
PinMinimumLength Write UInt32 Integer value that sets the minimum number of characters required for the Windows Hello for Business PIN. Valid values are 4 to 127 inclusive and less than or equal to the value set for the maximum PIN. Valid values 4 to 127
PinPreviousBlockCount Write UInt32 Controls the ability to prevent users from using past PINs. This must be set between 0 and 50, inclusive, and the current PIN of the user is included in that count. If set to 0, previous PINs are not stored. PIN history is not preserved through a PIN reset. Valid values 0 to 50
PinRecoveryEnabled Write Boolean Boolean value that enables a user to change their PIN by using the Windows Hello for Business PIN recovery service.
PinSpecialCharactersUsage Write String Controls the ability to use special characters in the Windows Hello for Business PIN. Possible values are: blocked, required, allowed, notConfigured. blocked, required, allowed, notConfigured
PinUppercaseCharactersUsage Write String This value configures the use of uppercase characters in the Windows Hello for Business PIN. Possible values are: blocked, required, allowed, notConfigured. blocked, required, allowed, notConfigured
SecurityDeviceRequired Write Boolean Controls whether to require a Trusted Platform Module (TPM) for provisioning Windows Hello for Business. A TPM provides an additional security benefit in that data stored on it cannot be used on other devices. If set to False, all devices can provision Windows Hello for Business even if there is not a usable TPM.
UnlockWithBiometricsEnabled Write Boolean Controls the use of biometric gestures, such as face and fingerprint, as an alternative to the Windows Hello for Business PIN. If set to False, biometric gestures are not allowed. Users must still configure a PIN as a backup in case of failures.
UseCertificatesForOnPremisesAuthEnabled Write Boolean Boolean value that enables Windows Hello for Business to use certificates to authenticate on-premise resources.
UseSecurityKeyForSignin Write Boolean Boolean value used to enable the Windows Hello security key as a logon credential.
WindowsHelloForBusinessBlocked Write Boolean Boolean value that blocks Windows Hello for Business as a method for signing into Windows.
Description Write String Admin provided description of the Device Configuration.
DisplayName Key String Admin provided name of the device configuration.
SupportsScopeTags Write Boolean Indicates whether or not the underlying Device Configuration supports the assignment of scope tags. Assigning to the ScopeTags property is not allowed when this value is false and entities will not be visible to scoped users. This occurs for Legacy policies created in Silverlight and can be resolved by deleting and recreating the policy in the Azure Portal. This property is read-only.
Id Write String The unique identifier for an entity. Read-only.
Assignments Write MSFT_DeviceManagementConfigurationPolicyAssignments[] Represents the assignment to the Intune policy.
Ensure Write String Present ensures the policy exists, absent ensures it is removed. Present, Absent
Credential Write PSCredential Credentials of the Admin
ApplicationId Write String Id of the Azure Active Directory application to authenticate with.
TenantId Write String Id of the Azure Active Directory tenant used for authentication.
ApplicationSecret Write PSCredential Secret of the Azure Active Directory tenant used for authentication.
CertificateThumbprint Write String Thumbprint of the Azure Active Directory application's authentication certificate to use for authentication.
ManagedIdentity Write Boolean Managed ID being used for authentication.
AccessTokens Write StringArray[] Access token used for authentication.

MSFT_DeviceManagementConfigurationPolicyAssignments

Parameters

Parameter Attribute DataType Description Allowed Values
dataType Write String The type of the target assignment. #microsoft.graph.groupAssignmentTarget, #microsoft.graph.allLicensedUsersAssignmentTarget, #microsoft.graph.allDevicesAssignmentTarget, #microsoft.graph.exclusionGroupAssignmentTarget, #microsoft.graph.configurationManagerCollectionAssignmentTarget
deviceAndAppManagementAssignmentFilterType Write String The type of filter of the target assignment i.e. Exclude or Include. Possible values are:none, include, exclude. none, include, exclude
deviceAndAppManagementAssignmentFilterId Write String The Id of the filter for the target assignment.
groupId Write String The group Id that is the target of the assignment.
groupDisplayName Write String The group Display Name that is the target of the assignment.
collectionId Write String The collection Id that is the target of the assignment.(ConfigMgr)

Description

Intune Device Configuration Identity Protection Policy for Windows10

Permissions

Microsoft Graph

To authenticate with the Microsoft Graph API, this resource required the following permissions:

Delegated permissions

  • Read

    • DeviceManagementConfiguration.Read.All
  • Update

    • DeviceManagementConfiguration.ReadWrite.All

Application permissions

  • Read

    • DeviceManagementConfiguration.Read.All
  • Update

    • DeviceManagementConfiguration.ReadWrite.All

Examples

Example 1

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter(Mandatory = $true)]
        [PSCredential]
        $Credscredential
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneDeviceConfigurationIdentityProtectionPolicyWindows10 'Example'
        {
            Assignments                                  = @(
                MSFT_DeviceManagementConfigurationPolicyAssignments{
                    deviceAndAppManagementAssignmentFilterType = 'none'
                    dataType = '#microsoft.graph.allLicensedUsersAssignmentTarget'
                }
            );
            Credential                                   = $Credscredential;
            DisplayName                                  = "identity protection";
            EnhancedAntiSpoofingForFacialFeaturesEnabled = $True;
            Ensure                                       = "Present";
            PinExpirationInDays                          = 5;
            PinLowercaseCharactersUsage                  = "allowed";
            PinMaximumLength                             = 4;
            PinMinimumLength                             = 4;
            PinPreviousBlockCount                        = 3;
            PinRecoveryEnabled                           = $True;
            PinSpecialCharactersUsage                    = "allowed";
            PinUppercaseCharactersUsage                  = "allowed";
            SecurityDeviceRequired                       = $True;
            SupportsScopeTags                            = $True;
            UnlockWithBiometricsEnabled                  = $True;
            UseCertificatesForOnPremisesAuthEnabled      = $True;
            UseSecurityKeyForSignin                      = $True;
            WindowsHelloForBusinessBlocked               = $False;
        }
    }
}

Example 2

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter(Mandatory = $true)]
        [PSCredential]
        $Credscredential
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneDeviceConfigurationIdentityProtectionPolicyWindows10 'Example'
        {
            Assignments                                  = @(
                MSFT_DeviceManagementConfigurationPolicyAssignments{
                    deviceAndAppManagementAssignmentFilterType = 'none'
                    dataType = '#microsoft.graph.allLicensedUsersAssignmentTarget'
                }
            );
            Credential                                   = $Credscredential;
            DisplayName                                  = "identity protection";
            EnhancedAntiSpoofingForFacialFeaturesEnabled = $True;
            Ensure                                       = "Present";
            PinExpirationInDays                          = 5;
            PinLowercaseCharactersUsage                  = "allowed";
            PinMaximumLength                             = 4;
            PinMinimumLength                             = 4;
            PinPreviousBlockCount                        = 4; # Updated Property
            PinRecoveryEnabled                           = $True;
            PinSpecialCharactersUsage                    = "allowed";
            PinUppercaseCharactersUsage                  = "allowed";
            SecurityDeviceRequired                       = $True;
            SupportsScopeTags                            = $True;
            UnlockWithBiometricsEnabled                  = $True;
            UseCertificatesForOnPremisesAuthEnabled      = $True;
            UseSecurityKeyForSignin                      = $True;
            WindowsHelloForBusinessBlocked               = $False;
        }
    }
}

Example 3

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter(Mandatory = $true)]
        [PSCredential]
        $Credscredential
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneDeviceConfigurationIdentityProtectionPolicyWindows10 'Example'
        {
            Credential                                   = $Credscredential;
            DisplayName                                  = "identity protection";
            Ensure                                       = "Absent";
        }
    }
}