IntuneSecurityBaselineMicrosoftEdge

Parameters

Parameter	Attribute	DataType	Description	Allowed Values
Description	Write	String	Policy description
DisplayName	Key	String	Policy name
RoleScopeTagIds	Write	StringArray[]	List of Scope Tags for this Entity instance.
Id	Write	String	The unique identifier for an entity. Read-only.
InternetExplorerIntegrationReloadInIEModeAllowed	Write	SInt32	Allow unconfigured sites to be reloaded in Internet Explorer mode (0: Disabled, 1: Enabled)	0, 1
SSLErrorOverrideAllowed	Write	SInt32	Allow users to proceed from the HTTPS warning page (0: Disabled, 1: Enabled)	0, 1
InternetExplorerIntegrationZoneIdentifierMhtFileAllowed	Write	SInt32	Automatically open downloaded MHT or MHTML files from the web in Internet Explorer mode (0: Disabled, 1: Enabled)	0, 1
edge_DynamicCodeSettings	Write	SInt32	Dynamic Code Settings (0: Disabled, 1: Enabled)	0, 1
DynamicCodeSettings_DynamicCodeSettings	Write	SInt32	Dynamic Code Settings (Device) - Depends on edge_DynamicCodeSettings (0: Default dynamic code settings, 1: Prevent the browser process from creating dynamic code)	0, 1
ApplicationBoundEncryptionEnabled	Write	SInt32	Enable Application Bound Encryption (0: Disabled, 1: Enabled)	0, 1
BrowserLegacyExtensionPointsBlockingEnabled	Write	SInt32	Enable browser legacy extension point blocking (0: Disabled, 1: Enabled)	0, 1
SitePerProcess	Write	SInt32	Enable site isolation for every site (0: Disabled, 1: Enabled)	0, 1
EdgeEnhanceImagesEnabled	Write	SInt32	Enhance images enabled (0: Disabled, 1: Enabled)	0, 1
ExtensionInstallBlocklist	Write	SInt32	Control which extensions cannot be installed (0: Disabled, 1: Enabled)	0, 1
ExtensionInstallBlocklistDesc	Write	StringArray[]	Extension IDs the user should be prevented from installing (or * for all) (Device) - Depends on ExtensionInstallBlocklist
WebSQLAccess	Write	SInt32	Force WebSQL to be enabled (0: Disabled, 1: Enabled)	0, 1
BasicAuthOverHttpEnabled	Write	SInt32	Allow Basic authentication for HTTP (0: Disabled, 1: Enabled)	0, 1
MicrosoftEdge_HTTPAuthentication_AuthSchemes	Write	SInt32	Supported authentication schemes (0: Disabled, 1: Enabled)	0, 1
AuthSchemes_AuthSchemes	Write	String	Supported authentication schemes (Device) - Depends on MicrosoftEdge_HTTPAuthentication_AuthSchemes
NativeMessagingUserLevelHosts	Write	SInt32	Allow user-level native messaging hosts (installed without admin permissions) (0: Disabled, 1: Enabled)	0, 1
InsecurePrivateNetworkRequestsAllowed	Write	SInt32	Specifies whether to allow insecure websites to make requests to more-private network endpoints (0: Disabled, 1: Enabled)	0, 1
InternetExplorerModeToolbarButtonEnabled	Write	SInt32	Show the Reload in Internet Explorer mode button in the toolbar (0: Disabled, 1: Enabled)	0, 1
SmartScreenEnabled	Write	SInt32	Configure Microsoft Defender SmartScreen (0: Disabled, 1: Enabled)	0, 1
SmartScreenPuaEnabled	Write	SInt32	Configure Microsoft Defender SmartScreen to block potentially unwanted apps (0: Disabled, 1: Enabled)	0, 1
PreventSmartScreenPromptOverride	Write	SInt32	Prevent bypassing Microsoft Defender SmartScreen prompts for sites (0: Disabled, 1: Enabled)	0, 1
PreventSmartScreenPromptOverrideForFiles	Write	SInt32	Prevent bypassing of Microsoft Defender SmartScreen warnings about downloads (0: Disabled, 1: Enabled)	0, 1
SharedArrayBufferUnrestrictedAccessAllowed	Write	SInt32	Specifies whether SharedArrayBuffers can be used in a non cross-origin-isolated context (0: Disabled, 1: Enabled)	0, 1
TyposquattingCheckerEnabled	Write	SInt32	Configure Edge TyposquattingChecker (0: Disabled, 1: Enabled)	0, 1
Assignments	Write	MSFT_DeviceManagementConfigurationPolicyAssignments[]	Represents the assignment to the Intune policy.
Ensure	Write	String	Present ensures the policy exists, absent ensures it is removed.	Present, Absent
Credential	Write	PSCredential	Credentials of the Admin
ApplicationId	Write	String	Id of the Azure Active Directory application to authenticate with.
TenantId	Write	String	Id of the Azure Active Directory tenant used for authentication.
ApplicationSecret	Write	PSCredential	Secret of the Azure Active Directory tenant used for authentication.
CertificateThumbprint	Write	String	Thumbprint of the Azure Active Directory application's authentication certificate to use for authentication.
ManagedIdentity	Write	Boolean	Managed ID being used for authentication.
AccessTokens	Write	StringArray[]	Access token used for authentication.

MSFT_DeviceManagementConfigurationPolicyAssignments

Parameters

Parameter	Attribute	DataType	Description	Allowed Values
dataType	Write	String	The type of the target assignment.	#microsoft.graph.cloudPcManagementGroupAssignmentTarget, #microsoft.graph.groupAssignmentTarget, #microsoft.graph.allLicensedUsersAssignmentTarget, #microsoft.graph.allDevicesAssignmentTarget, #microsoft.graph.exclusionGroupAssignmentTarget, #microsoft.graph.configurationManagerCollectionAssignmentTarget
deviceAndAppManagementAssignmentFilterType	Write	String	The type of filter of the target assignment i.e. Exclude or Include. Possible values are:none, include, exclude.	none, include, exclude
deviceAndAppManagementAssignmentFilterId	Write	String	The Id of the filter for the target assignment.
deviceAndAppManagementAssignmentFilterDisplayName	Write	String	The display name of the filter for the target assignment.
groupId	Write	String	The group Id that is the target of the assignment.
groupDisplayName	Write	String	The group Display Name that is the target of the assignment.
collectionId	Write	String	The collection Id that is the target of the assignment.(ConfigMgr)

Description

Intune Security Baseline Microsoft Edge

Permissions

Microsoft Graph

To authenticate with the Microsoft Graph API, this resource required the following permissions:

Delegated permissions

• Read

  • Group.Read.All, DeviceManagementConfiguration.Read.All

• Update

  • Group.Read.All, DeviceManagementConfiguration.ReadWrite.All

Application permissions

• Read

  • Group.Read.All, DeviceManagementConfiguration.Read.All

• Update

  • Group.Read.All, DeviceManagementConfiguration.ReadWrite.All

Examples

Example 1

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter()]
        [System.String]
        $ApplicationId,

        [Parameter()]
        [System.String]
        $TenantId,

        [Parameter()]
        [System.String]
        $CertificateThumbprint
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneSecurityBaselineMicrosoftEdge 'mySecurityBaselineMicrosoftEdge'
        {
            DisplayName           = 'test'
            InsecurePrivateNetworkRequestsAllowed                   = "0";
            InternetExplorerIntegrationReloadInIEModeAllowed        = "0";
            InternetExplorerIntegrationZoneIdentifierMhtFileAllowed = "0";
            InternetExplorerModeToolbarButtonEnabled                = "0";
            Ensure                = 'Present'
            ApplicationId         = $ApplicationId;
            TenantId              = $TenantId;
            CertificateThumbprint = $CertificateThumbprint;
        }
    }
}

Example 2

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter()]
        [System.String]
        $ApplicationId,

        [Parameter()]
        [System.String]
        $TenantId,

        [Parameter()]
        [System.String]
        $CertificateThumbprint
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneSecurityBaselineMicrosoftEdge 'mySecurityBaselineMicrosoftEdge'
        {
            DisplayName           = 'test'
            InsecurePrivateNetworkRequestsAllowed                   = "0";
            InternetExplorerIntegrationReloadInIEModeAllowed        = "0";
            InternetExplorerIntegrationZoneIdentifierMhtFileAllowed = "0";
            InternetExplorerModeToolbarButtonEnabled                = "1"; # Drift
            Ensure                = 'Present'
            ApplicationId         = $ApplicationId;
            TenantId              = $TenantId;
            CertificateThumbprint = $CertificateThumbprint;
        }
    }
}

Example 3

This example is used to test new resources and showcase the usage of new resources being worked on. It is not meant to use as a production baseline.

Configuration Example
{
    param(
        [Parameter()]
        [System.String]
        $ApplicationId,

        [Parameter()]
        [System.String]
        $TenantId,

        [Parameter()]
        [System.String]
        $CertificateThumbprint
    )
    Import-DscResource -ModuleName Microsoft365DSC

    node localhost
    {
        IntuneSecurityBaselineMicrosoftEdge 'mySecurityBaselineMicrosoftEdge'
        {
            DisplayName           = 'test'
            Ensure                = 'Absent'
            ApplicationId         = $ApplicationId;
            TenantId              = $TenantId;
            CertificateThumbprint = $CertificateThumbprint;
        }
    }
}